Toggling Calculation Results - Casio fx-92B User Manual

overwrite modes by performing the operations:
I
appears as " " in the insert mode and as " " in the overwrite mode.
Note: Natural Display always uses the insert mode, so changing display
format from Linear Display to Natural Display will automatically switch to
the insert mode.
Correcting and Clearing an Expression
To delete a single character or function: Move the cursor so it is directly to
the right of the character or function you want to delete, and then press
In the overwrite mode, move the cursor so it is directly under the character
or function you want to delete, and then press
To insert a character or function into a calculation: Use
move the cursor to the location where you want to insert the character or
function and then input it. Be sure always to use the insert mode if Linear
Display is selected.
To clear all of the calculation you are inputting: Press

Toggling Calculation Results

While Natural Display is selected, each press of
displayed calculation result between its fraction form and decimal form, its
form and decimal form, or its
÷ 6 = 1
6
( )
( ' 2 + 2)
(
While Linear Display is selected, each press of
displayed calculation result between its decimal form and fraction form.
1 ÷ 5 = 0.2 = 1
1 5
1 – 4 = 1
5 5
1 4
Important: • Depending on the type of calculation result that is on the display
when you press the
perform. • With certain calculation results, pressing the
the displayed value. • You cannot switch from decimal form to mixed fraction
form if the total number of digits used in the mixed fraction (including integer,
numerator, denominator, and separator symbols) is greater than 10.
Note: With Natural Display (MathO), pressing
inputting a calculation will display the calculation result in decimal form.
Pressing after that will switch to the fraction form or
calculation result. The
= 0.5235987756
6
' 3 = ' 6 + 2 ' 3 = 5.913591358
( ) 2 2
) 3
5
= 0.2
5
key, the conversion process may take some time to
form of the result will not appear in this case.
form and decimal form.
1
6
' 6 + 2 ' 3
0.2
1 5
E-9
(INS). The cursor
.
and
.
will toggle the currently
f 0.5235987756
f 5.913591358
will toggle the currently
f
f
key will not convert
instead of
form of the
.
to
1 5
0.2
after