Rear Panel Layout; Aux In Jack; Mains Input; Specification - Vox AGA4-AT Owner's Manual

All tube acoustic guitar amplifier

Table of Contents

Available languages

Connect keyboards and audio equipment with a mini-phone plug (unbalance) to this terminal.

Adjust the input volume on the connected instrument.

Connect your supplied mains power lead here.

NOTE: Use only the power cable that is included with the AGA4-AT. Using another power cable may

cause malfunctions.

The specific mains input voltage rating that your amplifier needs to run at is located on the rear panel

of your amplifier. Before making any connections or powering up the amplifier, make sure the correct

voltage is set. If you have any doubt, refer to your local VOX dealer.

Controls:

Inputs:

Tube compliment

Output Power:

Speaker:

Dimensions (W x D x H):

Weight:

Accessory:

*Specifications and appearance are subject to change without notice for improvement.

REAR PANEL LAYOUT

Reverb, Volume, Tone

INPUT Jack, AUX IN Jack

1 x 12AX7, 1 x EL84

4 W RMS (16Ω)

6. 5 inches (16Ω)

260 x 195 x 280 mm /10.24 x 7.68 x 11.02 inches

6.0 kg / 13.23 lbs

Power Cable, Manual

Table of Contents