Rear Panel Layout - Vox AC15CC1 Custom Classic Owner's Manual

3. Master Volume:
4. Tremolo Section:
Speed:
Depth:
5. Reverb Section:
6. Bass:
7. Treble:
8. Volume:
9. Input:

REAR PANEL LAYOUT

1 2
1. Loudspeaker Output Jacks:
2. Impedance Select Switch
Model AC15CC1
16 Ohm:
This controls the overall (Master) volume of your amplifier. Cleaner sounds
can be achieved by lowering the Volume and raising the Master. Setting
the Master lower and the Volume higher will give you a fatter, more dis-
torted tone.As with all the controls of this amplifier, please experiment with
different configurations to find the tones that fit your playing style.
This section allows you to control the overall Tremolo by adjusting the Speed
and Depth. You can remotely switch the Tremolo On or Off with the sup-
plied VF002 footswitch.
As you might have guessed, this controls the speed of the built-in Tremolo.
This controls the depth (intensity) of the built-in tremolo.
This section allows you to control the global Reverb level. You can remotely
switch the reverb On or Off with the supplied VF002 footswitch.
This controls the bass (low) frequencies in your sound - from warm and
light when turned down (counterclockwise) to dark and heavy when turned
up full (clockwise) and all points in-between.
This controls the treble (high) frequencies in your sound - from soft and
round when turned down (counterclockwise) to bright and cutting when
cranked (clockwise) and all points in-between.
This determines the sensitivity of the preamp section. Depending on where
this is set, you can either blend in more gain by turning it clockwise or you
can set it lower for a cleaner, "chimey" sound. This works directly with the
Master Volume meaning that if you keep this volume lower and the Master
higher, you will get a cleaner sound and conversely, if you keep this higher
and the Master lower you will get more gain.
This is where you plug in your guitar.
This is where you can hook up an external speaker cabinet(s) if desired.
Allows for the following configurations:
1) Set it to this if you use the internal 16ohm speaker only or 16ohm exter-
nal cabinet only.
4
3 4 5 6