Screen; Safety - Navman F350 Series Hardware User Manual

Screen

Complete the following:
If you want to ...
change the displayed screen mode
change the screen brightness in day
mode
change the screen brightness in
night mode
Your preferences are automatically saved.
You can simply tap on the brightness bar so that the screen brightness will be set immediately at the
position you tapped.

Safety

Then ...
tap Screen mode and select:
Auto: set to automatically change between Day and Night
modes.
Day: set the screen to be displayed in Day mode.
Night: set the screen to be displayed in Night mode.
tap / on Day brightness bar
The brightness bar indicates the brightness level in day mode.
Warning: Your Navman can heat up when the brightness scale is
set high, therefore, use lower brightness whenever acceptable.
tap / on Night brightness bar
The brightness bar indicates the brightness level in night
mode.
Warning: Your Navman can heat up when the brightness scale is
set high, therefore, use lower brightness whenever acceptable.
27