Ec-Declaration Of Conformity - Husqvarna 327LD Operator's Manual

Approved accessories
Blade shaft thread M10
Plastic blades
Trimmer head
The following attachments are recommended for the specified models.
Attachments
Hedge trimmer attachment with shaft HA 110
Hedge trimmer attachment with shaft HA 850
Clean sweep attachment with shaft SR600
Edger attachment with shaft
Saw attachment with shaft PA 1100
Cultivator attachment with shaft CA 150
The following attachments have been developed mainly for the Husqvarna 125LD trimmer, but can also be used with the
specified models.
Approved accessories
Cultivator attachment CAC
Edger attachment EAC
Pole saw attachment PAC
Blower attachment BAC
Hedge trimmer attachment HAC
EC-declaration of conformity (Applies to Europe only)
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare that the brush cutters Husqvarna
327LS and 327LDX with serial numbers dating from 2013 onwards (the year is clearly stated on the rating plate, followed
by the serial number), comply with the requirements of the COUNCIL'S DIRECTIVE:
- of May 17, 2006 "relating to machinery" 2006/42/EC
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. Conformity assessment according
to Annex V.
For information relating to noise emissions, see the Technical data chapter.
The following standards have been applied:
EN ISO 12100:2010, EN ISO 11806-1:2011, ISO 14982:1998, CISPR 12:2007
SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has performed voluntary type examination
on behalf of Husqvarna AB. The certificates are numbered:
SEC/09/2170 - 327LDx, SEC/09/2170 - 327LS Furthermore, conformity with Appendix V of Council Directive 2000/14/
EG is certified. The certificates have the numbers:
01/164/064 - 327LDx, 01/164/066 - 327LS
Huskvarna 8 April 2013
Per Gustafsson, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
24 – English
TECHNICAL DATA
Type
Tricut Ø 300 mm (Separate blades
have part number 531 01 77-15)
T25 (Ø 2.0 - 2.7 mm cord)
S35 (Ø 2.4 - 3.0 mm cord)
T35 (Ø 2.4 - 3.0 mm cord)
Art No.
537 19 66-01
537 19 66-02
537 19 67-01
537 19 69-01
537 18 33-17
537 42 54-01
Art No.
952 71 19-07
952 71 19-08
952 71 19-10
952 71 19-11
952 71 19-21
Cutting attachment guard, Art. no.
503 93 42-02
503 93 42-02 / 503 97 71-01
503 93 42-02 / 503 97 71-01
503 93 42-02 / 503 97 71-01
Use with
327LDx
327LDx
327LDx
327LDx
327LDx
327LDx
Use with
327LDx
327LDx
327LDx
327LDx
327LDx