IBM T860 User Manual page 10

Using the USB (Universal Serial Bus) HUB Featuers
Connecting USB devices
1.
Insert the USB cable into the square USB connector of the Speaker/USB HUB
Option as shown is the diagram on the left. Then, insert the other end of the
USB cable into the rectangular USB connector on a USB-compliant computer
or USB hub as shown in the diagram on the right.
2.
Insert the USB cable for USB-compliant devices into the rectangular USB
connector in the monitor as shown in the diagram on the right.
This is a simplified representation
of the rear view.
To USB downstream port
of the USB-compliant
computer or another hub
cable
Notes :
To activate the USB hub function, the
USB compliant computer (OS) or another hub with the USB cable(enclosed).
When connecting the USB cable, check that the shape of the connector at the cable side
matches the shape at the connecting side.
High powered devices (such as stand alone scanners and camera's etc.) can not be
connected to the USB HUB ports. Self powered devices (use an extermal AC adapter to
meet the high power repuirement) can be connected to the USB HUB port.
The USB HUB is compliant to the USB 2.0 Specification and will support low speed and full
speed devices (same as USB 1.1). The HUB can not support high speed devices and will
connect them as full speed devices.
This is a simplified representation
of the side view.
USB downstream Ports
connect the cables from USB-
compliant peripherals-such as
keyboard, mouse, etc
Speaker/USB HUB Option
A7
must be connected to a