Ibm T541H Monitor - IBM T541H Installation & User Manual

4. Route wires as shown in the illustration. Make sure connector 3 (not used for
T541H) is enclosed inside of the flat panel monitor base.
5. Your flat panel monitor will look similar to one of the following illustrations.
6. Replace the back panels on your IBM T541H flat panel monitor.
7. Connect the audio cable of the speaker bezel to the audio speaker connector on
your computer.
8. You can now turn your monitor on.
9. Press the power button on the speaker bezel to turn on the speakers.

IBM T541H monitor

5
Flyer