Casio fx-CP400 User Manual page 206

InputFunc
Syntax: InputFunc <user-defined function name>
(<argument >[,<argument >...]) [,"<string 1>"[,"<string
2>"]]
Function: When program execution reaches the
InputFunc command, the user is prompted to input
the contents of the user-defined function.
Example: InputFunc v(v0, t), "To define function
v0(m/s), t(sec)", "define function"
Description: See Input.
InputStr
Syntax: InputStr <variable name>[,"<string 1>"[,"
<string 2>"]]
Function: When program execution reaches the
InputStr command, the user is prompted for input of
a string, which is assigned to a variable.
Description: See Input.
Intersection
Function: Used as a SetInequalityPlot command
argument to specify an option. See SetInequalityPlot.
InvBinomialCD
Syntax: InvBinomialCD
value
Function: See "Inverse Binomial Cumulative
Distribution" (page 146).
InvChiCD
Syntax: InvChiCD
Function: See "Inverse χ
(page 146).
Inverse
Syntax: Inverse < or graph number>[,<color
command>]
Function: Graphs the inverse of a function.
Description: Graph number range: 1 to 100
InvFCD
Syntax: InvFCD
Function: See "Inverse
(page 146).
InvGeoCD
Syntax: InvGeoCD
Function: See "Inverse Geometric Cumulative
Distribution" (page 147).
InvHypergeoCD
Syntax: InvHypergeoCD
value, value
Function: See "Inverse Hypergeometric Cumulative
Distribution" (page 147).
I/O - Input
I/O - Input
Misc - Graph&Table(1)
k
value, Numtrial value,
k
value, value
2 Cumulative Distribution"
I/O - Sketch
k
value, : value, : value
Cumulative Distribution"
k
value, value
k
value, value,
InvNormCD
Syntax: {InvNormCD
Area value, value,
Function: See "Inverse Normal Cumulative
Distribution" (page 145).
InvPoissonCD
Syntax: InvPoissonCD
Function: See "Inverse Poisson Cumulative
Distribution" (page 147).
InvTCD
Syntax: InvTCD
Function: See "Inverse Student's Cumulative
Distribution" (page 146).
L
Lbl
See Goto~Lbl.
Ldot
Function: Used as a StatGraph command argument
to specify an option. See StatGraph.
Line
Syntax: Line <start point -coordinate>, <start point
-coordinate>, <end point -coordinate>, <end point
-coordinate>[,<color command>]
Function: Draws a line between two specified
coordinates.
Tip:
The line is not drawn if a start point coordinate or
end point coordinate is outside of the current Graph
window.
LinearReg (LinearR)
Misc - Statistics(1) - Regression
Syntax: LinearReg List, List[,[FreqList (or 1)]
[, [< >][,{On ; Off}]]]
Function: Performs = · +
Description: See SinReg.
LineType
Function: Used as a SetGrid command argument to
specify an option. See SetGrid.
LinRegTTest
Syntax: LinRegTTest "
{Freq ; 1}]
Function: See "Linear Regression Test" (page 142).
Chapter 12: Program Application Chapter 12: Program Application
k
; InvNorm }"Tail setting",
value
k
value, value
k
value, value
Ctrl - Jump
Misc - Statistics(2)
I/O - Sketch
regression.
Misc - Setup(2)
k
ρ condition", XList, YList[,
206 206