Fujitsu Stylistic Q552 Bios Manual page 3

system, the system beeps and/or displays an error
message after the Power On Self Test (POST). If the
failure is not too severe, it will give you an opportunity
to modify the setup utility settings, as described in the
following steps:
1. When you turn on or restart the computer there is
a beep and/or the following message appears on
the screen:
Error message - please run SETUP program Press
<F1>/[Ctrl+Alt+Del] button to continue, or <F2>/
[Rotation] button to enter SETUP
2. If an error message is displayed on the screen, and
you want to continue with the boot process and
start the operating system anyway, press the [F1]
key or the [Ctrl+Alt+Del] button.
If your tablet emits a series of beeps that

sounds like a code and the display is
blank, please refer to the Troubleshoot-
ing Section in the system User's Guide.
The Troubleshooting Section includes a
list of error messages and their meanings.
If your data security settings require it,

you may be asked for a password before
the operating system will be opened.
3. If an error message is displayed on the screen, and
you want to enter the setup utility, press the [F2]
key or [Rotation] button.
5. The system will then display the Info Menu with
current parameters values.
I n f o M e n u
3