Bios Setup Utility - Fujitsu Stylistic Q552 Bios Manual

S T Y L I S T I C Q 5 5 2 B I O S
Q Series BIOS

BIOS SETUP UTILITY

The BIOS Setup Utility is a program that sets up the
operating environment for your tablet. Your BIOS
is set at the factory for normal operating conditions,
therefore there is no need to set or change the BIOS
environment to operate your tablet.
The BIOS Setup Utility configures:
• Device control feature parameters, such as
changing
I/O addresses and boot devices.
• System Data Security feature parameters, such as
passwords.
Entering the BIOS Setup Utility
To enter the BIOS Setup Utility, do the following:
1. Turn on or restart your tablet.
2. Press the [Alt] button when the Fujitsu logo
appears on the screen. This will open the Boot/
Application Menu window.
3. From the Application Menu tab, tap on "BIOS
Setup"; the BIOS Setup utility will open with the
current settings displayed.
3. Tap the setup menu names in the menu bar at the
top of the screen to review or alter the current
settings of the various screens.
Navigating through the Setup Utility
The BIOS setup utility consists of six menus: Info,
System, Advanced, Security, Boot, and Exit. This docu-
ment explains each menu in turn, including all
submenus and setup items.
The following procedures allow you to navigate the
setup utility menus:
1. Single tapping on a menu item in the menu bar
(the 2nd line) selects the menu item.
2. Single tapping on a selection item in the setup
window (the left half rectangular area) opens a
selection list popup menu if the item already has
the focus (with reversed text), similar to pressing
the < Enter > key. If the item is not yet focused, a
single tap just moves the focus to the item.
3. Single tapping on an item in the selection list
2
popup menu selects the item if the item already
has the focus (with bright white text), similar to
pressing the <Enter> key. If the item is not yet
focused, single tap just moves the focus on the
item.
4. Single tap on a sub menu item in the setup
window selects the sub menu if the item already
has the focus (with brown text), like pressing the
<Enter> key. If the item is not yet focused, single
tap just moves the focus on the item.
5. On some character and numerical items (e.g.,
Time, Date, Password), software key pad is
available and appears in the item.
6. By single tapping on the <Shift> key, the following
two keyboards are toggled. Note that tap on keys
that can not be used as password/value is ignored
as with the real keyboard.
7. Single tap on the key name in the key help panel
(the bottom two-line area) performs the key's func-
tion.
8. Single tap on the title bar in sub menus ends the
sub menu, like pressing <Esc> key.
Selecting a field causes a help message

about that field to be displayed on the
right-hand side of the screen.
Tapping the [+] with the highlight on a

selection that is not a submenu or auto
selection will cause a list of all options for
that item to be displayed. Tapping the
item in the list will select the highlighted
choice. Tapping the [-] will close the list.
7. Tapping "Load Setup Defaults" from the Exit menu
resets all items in the BIOS to the default values.
8. Tapping "Exit Saving Changes" from the Exit menu
saves the current configuration and exits the BIOS
Setup Utility. You will be asked to verify this selec-
tion before it is executed.
9. Tapping [F1] at the bottom of the screen gives you
a general help screen.
Entering the Setup Utility After a Configuration
Change or System Failure
If there has been a change in the system configuration
that does not agree with the parameter settings stored
in your BIOS memory, or there is a failure in the