Fujitsu Stylistic Q552 Bios Manual page 19

Hard Disk Security Submenu of the Security Menu
The Hard Disk Security submenu is for configuring hard disk security features.
Drive0:
Set Master Password
Set User Password
Password Entry on Boot:
F1 Help
ESC Exit
Table 13: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field Options
Drive0:
___
Set Master
___
Password
Set User Password
----
Password Entry on
Disabled

Boot:
Enabled

Phoenix SecureCore(tm) Tiano Setup
Security
Hard Disk Security
Clear
[Enter]
[Enter]
[Enabled]
Select Item -/Space
/
Select Menu Enter
/
Figure 13. Hard Disk Security Submenu
Default Description
Clear Display-only. Default is Clear. When the Drive0 Password has been set,
the field changes to Set. When this password is set, the primary hard disk
drive cannot be used in another system unless the password is entered.
[Enter] Sets, changes or cancels the Master Password. The Master Password may
be up to seven characters long and must include only letters or numbers
(no symbols). Passwords are NOT case-sensitive. When a Master Password
is set, the hard disk is locked with the password. Data in the locked disk
cannot be read on other systems.
[Enter] Sets, changes or cancels the User Password. The User Password may be up
to seven characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. When a User Password is set,
the hard disk is locked with the password. Data in the locked disk cannot
be read on other systems.
[Enabled] When set to disabled, entry of a Hard Disk Password is not required before
OS boot. (The hard disk is still password-protected without password
entry.)
S e c u r i t y M e n u
F9
Change Values
F10
Select ► Sub-Menu
Item Specific Help
Configure hard disk
security feature.
Setup Defaults
Save and Exit
19