GE DDC4400TWH Installation Instructions page 4

EXHAUST INFORMATION (continued)
EXHAUST SYSTEM CHECK LIST
HOOD OR WALL CAP
SEPARATION OF TURNS
of straight duct, including distance between last turn and
SIDE OR BOTTOM EXHAUST
THIS DRYER COMES READY FOR REAR
EXHAUSTING. IF SPACE IS LIMITED, USE
THESE INSTRUCTIONS
DIRECTLY FROM THE SIDE OR BOTTOM OF
THE CABINET.
•
•
•
•
•
•
•
WARNING-
BACK OPENING WITHOUT THE PLATE.
ALCOVE OR CLOSET INSTALLATION
• If your dryer is approved for installation in an alcove or
• MUST
EXHAUST INFORMATION
•
NOTE: WHEN THE EXHAUST DUCT IS LOCATED AT THE REAR OF
THE DRYER, MINIMUM CLEARANCE FROM THE WALL IS 5.5 in.
Installation Instructions
TO EXHAUST
NEVER LEAVE THE
TURNS OTHER THAN 90º
SEALING OF JOINTS
INSULATION
Duct work that runs through an unheated area or is near air
conditioning should be insulated to reduce condensation and
B
PARTS AVAILABLE FROM LOCAL SERVICE
ORGANIZATION
•
•
•
• Closet doors must be louvered or otherwise ventilated and
4
FIXING HOLE
A
9"