Installation Instructions - GE DDC4400TWH Installation Instructions

STEP 4 -
STEP 5 -
STEP 6 - Hook both chains from upper unit to appropriate
STEP 7 -
Alternate Method for Installation of Wall Hooks
STEP 1
If wall studs are not correctly spaced or centered behind upper
STEP 2
NOTE: If wall is concrete or block, drill holes and use appropriate
WARNING
-
APPLIANCE MUST BE PROPERLY GROUNDED.
Grounding:
•If local codes permit, be sure ground strap is connected
to neutral (centre terminal of block and to ground screw
•If local codes do not permit frame of dryer to be grounded
must be grounded by attaching a ground wire (not
supplied) to the green grounding screw on rear of dryer
and to a grounded metal cold water pipe or other
WARNING:
OF THE TERMINAL BLOCK.

Installation Instructions

CONNECTING DRYER USING 3-WIRE CONNECTION
FOR PERSONAL SAFETY THIS
NEVER LEAVE THE COVER OFF
STEP 7
ground (not provided) to grounded metal,
cold water pipe, or other established
ground determined by a qualified
Fuse
Green Ground Screw
Screws
Cover
cord kit marked for use with dryers and provided with closed loop or
Screw Hot
Wire
(white)
N
Hot
Wire
Strain