Toshiba Tecra A3 User Manual page 51

DC-In LED
Power LED
Battery LED
Hard Disk Drive LED
Infrared port
Wireless
Communication LED
Wireless
Off On
Communication
Switch
Headphone Jack
Microphone Jack
TECRA A3/S2
The DC-IN LED indicates the computer is
connected to the AC adapter and it is plugged into
an AC power source.
The Power LED flashes amber while the system
is in Standby mode. The LED turns off when the
computer is turned off or in Hibernation mode. In
normal operating mode, the LED is green.
The Battery LED indicates the battery's current
charge/discharge status. It lights green when the
battery is fully charged. It lights amber while the
battery is being charged from the AC adapter. It
flashes amber when the battery capacity is low.
The Hard Disk Drive LED glows green when the
computer is accessing the hard disk.
This Infrared port is compatible with Infrared Data
Association (IrDA) Fast InfraRed (FIR) standards.
It enables cableless 4 Mbps data transfer with IrDA
1.1 compatible external devices.This only applies
the infrared model of the computer. Not all
versions have this feature.
(This function is available depending on the model
you purchased.)
The Wireless Communication LED lights up
when he wireless LAN is on.
(This function is available depending on the model
you purchased.)
The Wireless Communication Switch turns on
the wireless networking transceiver.
(This function is available depending on the model
you purchased.)
The Headphone Jack lets you connect stereo
headphones or other audio-output devices, such
as external speakers. Connecting headphones or
other devices to this jack automatically disables
the internal speakers.
A standard 3.5 mm mini microphone jack enables
connection of a three conductive type mini-jack for
a monaural microphone.
The Grand Tour
2-2