Toshiba Tecra A3 User Manual page 46

Low Battery
Automatic
Hibernation
Hibernation
Standby
■
Before entering Standby mode, be sure to save your data.
■
Do not install or remove a memory module while the computer is in
Standby mode. The computer or the module could be damaged.
■
Do not remove the battery pack while the computer is in Standby mode.
Data in memory will be lost.
TECRA A3/S2
When battery power is exhausted to the point that
computer operation cannot be continued, the
system automatically enters Hibernation and
shuts down. You can specify the setting in the
TOSHIBA Power Saver utility.
This feature lets you turn off the power without
exiting from your software. The contents of main
memory are saved to the hard disk. When you turn
on the power again, you can continue working right
where you left off.
In Standby mode, power to the system remains on,
but the CPU and all other devices are in sleep
mode. When the computer is in standby mode, the
Power LED flashes in amber. The computer enters
Standby mode regardless of the Hibernate setting.
TECRA A3/S2 Features
1-11