2. Remove all cables connected to the computer.
3. Turn the computer upside down and remove the battery (refer to
Chapter 6, Power System).
4. Remove the screw securing the memory module socket cover.
5. Slide your fingernail or a thin object under the cover and lift it off.
6. Fit the module's connectors into the computer's connectors at about a
45 degree angle
connection.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
7. Push the module down
into place to secure the module.
TECRA A3/S2
Removing the memory module socket cover
➀
and press the module carefully to ensure a firm
➁
so it lies flat. Latches on either side will click
Optional Devices
8-7