Copy Program Function - Dimplex HTC621W Owner's Manual

Copy Program Function

Using this thermostat's COPY function is an easy and convenient way to copy the program-
ming for all four period settings (P1, P2, P3 and P4) from one day to another instead of
programming each day individually.
1. If you are not already in the program mode, press PROG to enter the program setting
mode.
2. Press DAY to select the day you wish to copy from.
3. Press COPY; the COPY symbol will appear and the next weekday will flash.
4. Press DAY to select the day you wish to copy the programs to.
5. Press COPY again to copy settings for all four program periods; the COPY symbol will
disappear to indicate that the COPY function is complete.
6. Repeat the above steps to copy the program to another day.
Tip: If you press COPY 12 times consecutively, the programmed settings will be copied for
the entire week.
PROG
Press to enter Program Se ng Mode
COPY
Press to copy all four programming
periods
16
Operation