Setting Program Schedules
First, select the day you wish to program; then select the start times and temperature set-
tings for all four programs periods. Scroll through the daily Program Periods in this order:
P1, P2, P3, P4. You may select any weekday to begin.
Temperature Se ng
1. Press PROG to enter the program setting mode.
2. Press DAY to select the day you wish to program. (P1 will appear ).
3. Press
or
4. Press
or
5. Press PROG again to set the time and temperature for the next periods (P2, P3
and P4).
6. Press PROG to exit program mode.
7. Repeat the above steps until the time and temperature settings for each day of the
week are programmed.
Weekdays
to set the desired temperature.
to set the start time.
15
Operation
Program Periods
Clock Symbol
Start Time