PRO SERIES
1. Download the Firmware to your PC
2. Unpack the content of the archive and copy it to the root folder of MicroSD-Card (recommended)
or internal Device storage
3. Switch off PocketBook Pro by pressing button On/Off
4. Switch on PocketBook Pro by pressing On/Off
5. During boot press and hold both Backward and Forward buttons simultaneously until the message
Firmware update...
is displayed on the screen
6. Follow the on-screen instructions
7. Wait for the message on the screen:
PocketBook Pro
Wait until you
Press central
NOTE You can check your current Firmware version in
NOTE If the firmware file is located in the Device's root folder, it will have a higher priority in comparison with the file
stored on the SD card during the update process.
Troubleshooting
Error Message
No upgrade image found
Upgrade image is corrupted or
Image is empty
File read error
Error. A different firmware version
is installed on the device
Firmware Update Manual
Please connect power
Key... on the screen and press OK button
Possible Reason
file SWUPDATE.BIN cannot be
found on the Micro SD card.
Make sure the file is in the root
folder of the card.
SWUPDATE.BIN file is damaged
or there is no space available on
the Micro SD card.
Incorrect Micro SD card
A firmware file of an older
version is stored in the device
internal memory.
cable, and then connect USB cable to
Main menu > Configuration > About device
Try to format your Micro SD card
(make a backup copies of all its
content prior to formatting) and
copy the file to the root of the
empty card. If this error persists,
use another card.
Delete some files from your
card
BIN file on it one more time.
Repeat the download from www.
pocketbook-int.com. If this error
repeats, use other card.
Try to use another MicroSD card
Delete the old version of the
firmware file from the Device's
internal memory root folder
FIRMWARE VERSION: 2.1.2
Correction Method
and
copy
SWUPDATE.
Need help?
Do you have a question about the Pro 612 and is the answer not in the manual?
Questions and answers