Rand McNally intelliroute TND 520 LM User Manual page 21

Rand McNally IntelliRoute TND User Manual
® ™
Route to a Latitude/Longitude
1. Tap Choose Destination > New Location > Enter Lat/Long
2. Tap in the Latitude fi eld.
3. Enter the latitude of the location and tap Enter.
4. Tap in the Longitude fi eld.
5. Enter the longitude of the location and tap Enter.
6. Tap Go. The Confi rmation Window displays. (See page 30.)
7. Tap Begin New Route to navigate to the location.
Note: There are two ways to enter latitude/longitude: by decimal degrees
or by degrees, minutes, and seconds.
3. Destinations > Addresses
17