Olympus TG-630 Instruction Manual page 27

Registering one touch white balance Registering one touch white balance
Select [  One Touch 1] or [  One Touch 2], face the camera toward a piece of white paper or other white
object, and press the  button.
● The camera releases the shutter and the white balance is registered. When the white balance was
previously registered, the registered data is updated.
● The registered white balance data will not be cleared by turning off the power.
● Perform this procedure under the light where the pictures will be actually taken.
● When the camera settings are changed, the white balance must be registered again.
● When the white balance cannot be registered, check that the white paper fi lls the screen, and then
perform the procedure again.
27
EN