Olympus TG-630 Instruction Manual page 26

ISO sensitivity
l ISO Auto
m High ISO
Auto
Q to P Value
Drive
o Single
j Sequential
c High-Speed1
d
High-Speed2
Image size
5 3968×2976
4
3200×2400
3 1920×1440
7 640×480
Aspect
u
4:3
v
16:9
w
3:2
x
1:1
● In certain shooting modes, some functions cannot be set. Refer to "List of settings available in each shooting
mode" (p. 66).
● Examples of image size when the aspect ratio is 4:3.
26 EN
Sets the ISO sensitivity.
The camera automatically sets the sensitivity with priority on image quality.
The camera automatically sets the sensitivity with priority on minimizing blur caused
by a moving subject or by camera shake.
Set a smaller value to reduce noise in the picture, or a larger value to reduce blur.
Sets the sequential shooting function.
One frame is shot each time the shutter button is pressed.
The images are taken sequentially while holding down the shutter for up to 100
frames.
The camera takes sequential shots at approximately 15 frames/sec.
The camera takes sequential shots at approximately 60 frames/sec.
Sets the number of recording pixels.
Suitable for printing pictures over A3 (11×17 in.).
Suitable for printing pictures up to A3 (11×17 in.).
Suitable for printing pictures up to A4 size (8.5×11 in.).
Suitable for using pictures on emails.
Sets the horizontal-to-vertical ratio of images.
Change the horizontal-to-vertical ratio when taking pictures.