Garmin ZUMO 200 Owner's Manual page 53

Problem/Question
The touch screen is not
responding to my touches
properly.
How do I know my zūmo
is in USB mass storage
mode?
My computer never
senses that the zūmo is
connected.
I cannot see any new
removable drives in my list
of drives.
How can I find restaurants
near the hotel I will be
staying at in the future?
zūmo 200 Series Owner's Manual
Solution/Answer
Calibrate the touch screen as described on
When your zūmo is in USB mass storage mode, a picture of a
zūmo connected to a computer is shown. Also, you should see
two new removable disk drives listed in
1. Unplug the mini‑USB cable from your computer.
2. Turn the zūmo off.
3. Plug the mini‑USB cable into a USB port on your computer
and into your zūmo. The zūmo automatically turns on and
goes into USB mass storage mode. Ensure that your zūmo is
connected to a USB port and not a USB hub.
If you have several network drives mapped on your computer,
Windows can have trouble assigning drive letters to your zūmo
drives. See your operating system Help file to learn how to map
or assign drive letters.
1. Touch Where To?
vacation destination).
2. Find the hotel, and touch Go!.
Menu Where To?
3. Touch >
4. Search for a restaurant. Restaurants nearest your hotel are
listed first.
You can also use the GPS simulator
System).
My
> near > Different City
near My
> >
(Tools
Appendix
page 40.
Computer.
(and enter your
Destination.
> Settings >