Watching Videos; Watching A Video - Garmin StreetPilot 7200, 7500 Owner's Manual

Watching a Video

Your StreetPilot accepts NTSC (North America) or PAL
(Australia) composite video. You need an A/V adapter
cable available from Garmin or an electronics store. Your
video device may require an additional adapter cable.
1. Connect the small end of the A/V adapter cable
to the A/V In connector on the right side of the
StreetPilot.
2. Connect the red, white, and yellow connectors to
the corresponding plugs on your video device.
3. Apply external power to the video device, if
necessary. Turn on the video device.
4. Touch Yes to switch to the video. To
automatically switch to the video, open the Menu
page and touch Settings
Input > Detection Response.
StreetPilot 7200/7500 Owner's Manual
W
aTchinG
> General > Video
V
ideos
Connecting the A/V Adapter Cable
5. Touch anywhere on the screen to return to the
previous screen (such as the map).
6. To resume watching the video, from the Menu
page, touch Settings
View Source.
note: You might need to change your DVD
player to display the screen output in 16:9 mode.
W
atchinG
> General > Video Input
V
ideos
>