L
f
y
s
oadinG
iLes on
oUr
treet
Step 4: Connect the USB Cable
Use the USB cable provided to connect your StreetPilot
to your computer. Also use the USB cable when updating
the StreetPilot software or loading additional maps.
To connect your StreetPilot to your computer:
1. Plug the small end of the USB cable into the
connector located on the side of your StreetPilot.
2. Connect the larger end of the USB cable to an
available USB port on your computer.
Connecting the USB Cable
22
P
iLot
USB Cable
Step 5: Select USB Mass Storage
After connecting the USB cable to the StreetPilot and
your computer, press the
of the StreetPilot to turn it on. The following screen
appears:
To transfer files to your StreetPilot, touch
Storage.
If you would like to use MapSource or update your
software, touch
garmin
Power
button on the front
uSb mass
mode.
StreetPilot 7200/7500 Owner's Manual