Garmin Quest 2 Owner's Manual page 32

b o > p
asIc peratIon lannInG and
To avoid an area:
1.. Press.and.hold.MeNU.to.open.the.Route.Options.menu..
2.. Highlight.Avoidances.and.press.OK..
3.. Highlight.the.Add....button.and.press.OK..
4.. Highlight.Area Avoidance.and.press.OK..A.map.appears,.
enabling.you.to.mark.a."start.point.".
5.. Use.the.Rocker to move the map pointer to the first corner
of.the.area.you.want.to.avoid.and.press.OK..A.blue.push.pin.
marks.the.start.point..
6.. Use.the.Rocker.to.move.
the.map.pointer.to.the.far.
corner.of.the.area.you.
want.to.avoid.and.press.
OK. You.have.drawn.a.
dark.rectangle.around.the.
area.you.want.to.avoid.
7.. A.map.of.the.avoided.area.
appears..Press.OK.
The Avoidances page, shown above, lists the avoided area with a
default name (Area 000).
2
m r
odIfyInG outes
After you enter the avoid areas and roads, your Quest 2 avoids
these roads/areas unless no other roads are available, until you
remove them from the Custom Avoidances list, or until you
uncheck them.
To uncheck an avoidance, select the check box to the left of the
avoidance name and press OK. An unchecked box indicates that
the road/area will not be avoided.
To change the name of an avoidance, select the A
on-screen keyboard to create a new name. Select the clock
choose the date that you want the avoidance to expire. Select the
red X to permanently delete the avoidance.
Uncheck.the.
box.to.the.
left.of.the.
avoidance.to.
deactivate.it.
Avoidances Page
and use the
to
A
Clock
Red.X
Quest 2 Owner's Manual
®