Viewing The Map Orientation; Data Fields - Garmin Quest TM Owner's Manual

Pocket-sized navigator
Table of Contents

Advertisement

Viewing the Map Orientation

You can orient the map in one of two ways. North Up shows the
Map page with North always at the top, as if you were reading a
paper map. Track Up allows the map to automatically rotate so
your direction of travel always appears at the top of the Map page.
If you are using Track up, a white N indicator, in the top left corner
of the Map page, points to the North.
Your Quest is set to show the Map page in Track Up orientation
until you zoom out to the 200-mile zoom range or above. To
change the map orientation settings, see page 35.
Track Up
Quest Owner's Manual

Data Fields

The Map page displays data fields on the right-hand column of the
page. Information in these fields changes depending on whether
you are navigating a route or just traveling with the Quest turned
on. Data fields also appear on the Trip Information page (page
34) and the Compass page (page 22). For a complete list and
description of data field options, see page 47.
To change the data fields on the Map page:
1. Open the Map page and press the MENU key.
2. Highlight Edit Fields and press OK.
3. Use the Rocker pad to highlight the data field you want to
4. Highlight the new data field type in the list and press OK.
5. When you are finished changing the data fields, press Page
North Up
U
SING THE
change and press OK.
to exit.
Data fields
M
P
>
M
P
AIN
AGES
AP
AGE
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Quest tm 2QuestQuest 2

Table of Contents