Menu Differences; Convert To Dxf Format - Garmin PC150 Owner's Manual

10.2 MENU DIFFERENCES

The DOS command line syntax for executing PCX5AVD is similar to PCX5
(see Section 3.1). To run the program, type the following:
PCX5AVD [-cXXX.cfg] [-ega] [-mc<n1>] [-me<n2>]
After invoking PCX5AVD, the main program screen will appear as illustrated
below:
Figure 10-1: MAIN MENU
The following sections describe the menu differences that appear on the
PCX5AVD program.

10.2.1 CONVERT TO DXF FORMAT

When converting ACSII data files to DXF format (see Section 4.5), the DXF
Conversion Options dialog box provides additional options for outputting
Facility Name, City and State to the DXF file. This additional information is
available for Airport and NAVAID waypoints obtained from the GPS's
aviation database.
10-2