It is important to remember when uploading new schedule or checklist
information that the new items will replace the old items.
The following settings are used on the GPS 150 :
For normal PC kit interfacing (waypoint transfer, etc.)
Channel 2 : IN: Off
For real time plotting/logging or NMEA communication
Channel 2: IN: Off
These are covered in the GPS 150 Pilot's Guide.
11.2
ADDITIONAL FEATURES
The default configuration file for the PC150 PC-Kit is PC150.CFG
11-3
Figure 11-2: SCHEDULE EDITOR
OUT: Off
OUT: Plotting 4800 baud
9600 baud