Table of Contents
Advertisement
Cleaning and care
– Side panels
^ Use Miele stainless steel conditioning
agent to remove any soiling from
stainless steel surfaces.
^ Make sure you treat the side panels
with Miele stainless steel conditioning
agent each time you clean them.
This will give them a water and dirt
repellent protective coating and help
prevent re-soiling.
Ventilation gaps
^ The ventilation gaps should be
cleaned regularly with a brush or
vacuum cleaner. A build-up of dust
will increase the energy consumption
of the appliance.
Door seals
Do not use any oils or grease on the
door seals as these will cause the
seals to deteriorate and become
porous over time.
The door seals should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.
48
Metal grille at the back of the
appliance
The compressor and metal grille at the
back of the appliance (heat exchanger)
must be dusted at least once a year. A
build-up of dust will increase the
energy consumption of the appliance.
When cleaning make sure that the
cable, pipework and other
components do not get broken,
kinked or damaged in any way.
After cleaning
^ Push the dividing plate in until it
clicks into place.
^ Replace all shelves and accessories
in the refrigerator section.
^ Put the food back in the refrigerator.
^ Reconnect to the mains and switch
the appliance back on.
^ Switch on the Super freeze function
so that the freezer can cool down
quickly.
^ Once the freezer has reached the
required temperature, place the food
back in the freezer drawers and put
them back in the freezer.
^ Switch off the Super freeze function
as soon as the temperature in the
freezer is a constant -18 °C or colder.
Hide quick links:
Advertisement
Table of Contents
