Charging the Battery
1 Load the battery.
~ Slide the port/slot cover latch in the
direction indicated.
Ÿ Slide and open the cover in the
direction indicated while holding
down the latch.
! Insert the battery in the correct
direction (+/–) while pulling the blue
lever to the left.
2 Charge the battery.
~ Connect the USB cable.
Ÿ Press < or > to select "Adapter", and
press SET.
• The Access LED lights during charging.
• The approximate charging times are 5
hours (when connected to a PC) and
2.3 hours (when connected to the AC
adapter).
• Do not use batteries or AC adapters
made by other manufacturers.
The Access LED turns off when charging is
complete. Remove the USB cable and close the
cover firmly.
1
2
~
Ÿ
Getting to Know Your Camera
Access LED
11