Error Message List
Error Messages
No beep, power-on indicator turns off and
LCD is blank.
No beep, power-on indicator turns on and
LCD is blank.
No beep, power-on indicator turns on and
LCD is blank. But you can see POST on an
external CRT.
No beep, power-on indicator turns on and a
blinking cursor shown on LCD during
POST.
No beep during POST but system runs
correctly.
Chapter 4
Check or do the following in sequence:
Power source (battery pack and power adapter). See "Power
•
System Check" on page 89.
Ensure every connector is connected tightly and correctly.
•
Reconnect the DIMM.
•
LED board
•
Mainboard
•
Power source (battery pack and power adapter). See "Power
•
System Check" on page 89.
Reconnect the LCD connector
•
Hard disk drive
•
LCD inverter ID
•
LCD cable
•
LCD Inverter
•
LCD
•
Mainboard
•
Reconnect the LCD connectors.
•
LCD inverter ID
•
LCD cable
•
LCD inverter
•
LCD
•
Mainboard
•
Ensure every connector is connected tightly and correctly.
•
Mainboard
•
Speaker
•
Mainboard
•
93