Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Hotpoint WDF 740 P

  • Page 1: Table Of Contents

    Description of the Washer-dryer and starting a wash cycle, 6-7 Control panel Indicator lights Starting a wash cycle Wash cycles, 8 WDF 740 P/G/A/K/X Table of wash cycles Personalisation, 9 Setting the temperature Setting the drying cycle Functions Detergents and laundry, 10...
  • Page 2: Installation

    Installation 2. If the floor is not perfectly level, compensate for any Keep this instruction manual in a safe place for future unevenness by tightening or loosening the adjustable reference. Should the appliance be sold, transferred or front feet (see figure); the angle of inclination, measu- moved, make sure the instruction manual accompanies the red according to the worktop, must not exceed 2°.
  • Page 3 Connecting the drain hose • the supply voltage is included within the values indicated on the Technical details table Connect the drain hose, (see page 5); without bending it, to a draining duct or a wall • the socket is compatible with the washing drain situated between machine’s plug.
  • Page 4: The First Wash Cycle

    As the colours of the wires in the lead may not corre- The first wash cycle spond with the coloured markings identifying the termi- nals in your plug, proceed as follows: Once the appliance has been installed, and before you Connect Green &...
  • Page 5: Technical Data

    Technical data Model WDF 740 P/G/A/K/X width 59.5 cm Dimensions height 85 cm depth 53.5 cm from 1 to 7 kg for the wash programme Capacity from 1 to 5 kg for the drying programme Electrical please refer to the technical data plate...
  • Page 6: Description Of The Washer-Dryer And Starting A Wash Cycle

    Description of the Washer-dryer and starting a wash cycle Control panel WASH CYCLE PROGRESS indicator lights DISPLAY DOOR ON/OFF TEMPERATURE LOCKED button with indicator button light indicator light START/PAUSE Detergent dispenser drawer button with DRYING FUNCTION indicator light button buttons with indicator lights WASH CYCLE knob...
  • Page 7: Indicator Lights

    Indicator lights Temperature indicator light When a temperature value is selected, the correspon- ding indicator light will illuminate. The indicator lights provide important information. This is what they can tell you: Wash cycle phase indicator lights As the WASH CYCLE knob is rotated, the indicator lights illuminate, indicating the stages which will be performed Drying indicator light by the machine in accordance with the selected wash...
  • Page 8: Wash Cycles

    Wash cycles Table of wash cycles Detergents Max. load (kg) Max. Max. Cycle Description of the wash cycle temp. speed Drying duration (°C) (rpm) Fabric Mini Wash Normal softener load Essentials cycles 1 Cottons: extremely soiled whites. 90° 1400  ...
  • Page 9: Personalisation

    Personalisation Setting the temperature By pressing the TEMPERATURE button to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash ( ). The washer-dryer will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle.
  • Page 10: Detergents And Laundry

    It guarantees maximum care is taken of the garments and minimises the formation of creases. Wool: Hotpoint is the only Washer-dryer manufactu- rer to have been awarded the prestigious Woolmark Platinum Care endorsement (M.0508) by the Woolmark Company, which means that all woollen garments may Do not pour detergent into the middle compartment (*).
  • Page 11: Precautions And Tips

    Precautions and tips Disposal This Washer-dryer was designed and constructed in • Disposing of the packaging materials: observe local accordance with international safety regulations. The following information is provided for safety reasons and regulations so that the packaging may be re-used. •...
  • Page 12: Care And Maintenance

    Care and maintenance Cutting off the water and electricity sup- Cleaning the pump plies The washing machine is fitted with a self-cleaning pump • Turn off the water tap after every wash cycle. This will which does not require any maintenance. Sometimes, limit wear on the hydraulic system inside the washing small items (such as coins or buttons) may fall into the machine and help to prevent leaks.
  • Page 13: Troubleshooting

    Troubleshooting Your Washer-dryer could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be not solved easily using the following list. Problem: Possible causes / Solutions: The machine does not switch on. • The appliance is not plugged into the socket fully, or not enough to make contact.
  • Page 14 The machine is noisy. • There will always be some motor, pump and drum noise during spin. The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly.
  • Page 15: Assistance

    DOMESTIC PREMISES. 5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time.
  • Page 16: After Sales Service

    195077592.05 09/2010 - Xerox Fabriano After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us - the manufacturer. Essential Contact Information Hotpoint Service We are the largest service team in Europe offering you access to 400 skilled telephone advisors and 1000 fully qualified engineers on call to ensure you receive fast, reliable, local service.

This manual is also suitable for:

Wdf 740 gWdf 740 aWdf 740 kWdf 740 x

Table of Contents