Hotpoint WDL 540 P Instructions For Use Manual

Hotpoint WDL 540 P Instructions For Use Manual

Hotpoint wdl 540 p/g/a/k washer-dryer instructions for use

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Hotpoint WDL 540 P

  • Page 1: Table Of Contents

    6-7 Control panel Indicator lights Starting a wash cycle Wash cycles, 8 Table of wash cycles WDL 540 P/G/A/K Personalisation, 9 Setting the temperature Setting the drying cycle Functions Detergents and laundry, 10 Detergent dispenser drawer...
  • Page 2: Installation

    Installation 2. If the floor is not perfectly level, compensate for any Keep this instruction manual in a safe place for future unevenness by tightening or loosening the adjustable reference. Should the appliance be sold, transferred or front feet (see figure); the angle of inclination, measu- moved, make sure the instruction manual accompanies the red according to the worktop, must not exceed 2°.
  • Page 3 Connecting the drain hose • the supply voltage is included within the values indicated on the Technical details table Connect the drain hose, (see page 5); without bending it, to a draining duct or a wall • the socket is compatible with the washing drain situated between machine’s plug.
  • Page 4: The First Wash Cycle

    As the colours of the wires in the lead may not corre- The first wash cycle spond with the coloured markings identifying the termi- nals in your plug, proceed as follows: Once the appliance has been installed, and before you Connect Green &...
  • Page 5: Technical Data

    Technical data Model WDL 540 P/G/A/K width 59.5 cm Dimensions height 85 cm depth 53.5 cm from 1 to 7 kg for the wash programme Capacity from 1 to 5 kg for the drying programme Electrical please refer to the technical data plate...
  • Page 6: Description Of The Washer-Dryer And Starting A Wash Cycle

    Description of the Washer-dryer and starting a wash cycle Control panel WASH CYCLE PROGRESS indicator lights DRYING knob ON/OFF button DOOR TEMPERATURE LOCKED knob indicator light START/PAUSE Detergent dispenser drawer button with FUNCTION indicator light buttons with WASH CYCLE indicator lights knob Detergent dispenser drawer: used to dispense de- START/PAUSE button with indicator light: starts or...
  • Page 7: Indicator Lights

    Indicator lights Door locked indicator light If this indicator light is on, the appliance door is locked to prevent it from being opened accidentally; to avoid any The indicator lights provide important information. damage, wait for the indicator light to switch off before you This is what they can tell you: open the appliance door (wait approximately 3 minutes).
  • Page 8: Wash Cycles

    Wash cycles Table of wash cycles Max. load Cycle Detergents Max. Max. (kg) duration Description of the wash cycle temp. speed Drying (°C) (rpm) Fabric Mini Mini Wash Normal Normal softener load load Essentials cycles 1 Cottons: extremely soiled whites. 90°...
  • Page 9: Personalisation

    Personalisation Setting the temperature Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash ( ). The Washer-dryer will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle.
  • Page 10: Detergents And Laundry

    Detergents and laundry Garments requiring special care Detergent dispenser drawer Baby cycle: this wash cycle 6 can be used to remove the Good washing results also depend on the correct dose soiling typically caused by babies, while ensuring that all of detergent: adding too much detergent will not neces- detergent is removed from nappies in order to prevent sarily result in a more efficient wash, and may in fact a...
  • Page 11: Precautions And Tips

    Precautions and tips • Do not use the appliance to dry foam rubber or This Washer-dryer was designed and constructed in similar elastomers. accordance with international safety regulations. The • Make sure that the water tap is turned on during following information is provided for safety reasons and the drying cycles.
  • Page 12: Care And Maintenance

    Care and maintenance Cutting off the water and electricity sup- To access the pre-chamber: plies 1. using a screwdriver, remove the cover panel • Turn off the water tap after every wash cycle. This on the lower front part of will limit wear on the hydraulic system inside the the washing machine (see Washer-dryer and help to prevent leaks.
  • Page 13: Troubleshooting

    Troubleshooting Your Washer-dryer could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. Problem: Possible causes / Solutions: The machine does not switch on. • The appliance is not plugged into the socket fully, or not enough to make contact. •...
  • Page 14 The machine leaks from the • The dispenser drawer is blocked with detergent and requires cleaning. dispenser. • The water pressure is too high and requires turning down - turn down the tap on the water supply pipe slightly and try again. •...
  • Page 15: Assistance

    DOMESTIC PREMISES. 5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time.
  • Page 16: After Sales Service

    195108581.00 11/2012 - Xerox Fabriano After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us - the manufacturer. Essential Contact Information Hotpoint Service We are the largest service team in Europe offering you access to 400 skilled telephone advisors and 1000 fully qualified engineers on call to ensure you receive fast, reliable, local service.

Table of Contents