Charging Your Device - Garmin NULINK 1695 Owner's Manual

Garmin gps receiver user manual
Hide thumbs Also See for NULINK 1695:
Table of Contents

Advertisement

1. Remove the clear plastic from the
suction cup
2. Place the suction cup on the
windshield.
3. Flip the lever back toward the
windshield.
4. Plug the vehicle power cable
into the back of the cradle.
5. Snap the cradle
suction cup arm.
6. Plug the other end of the vehicle
power cable into a power outlet
in your vehicle.
7. Fit the bottom of your device into
the cradle.
nüLink! 1695 Owner's Manual
.
onto the
8. Tilt your device back until it
snaps into place.

Charging Your Device

Charge your device for at least 4
hours before using it on battery
power.
Your device can be powered three
ways.
Connect the vehicle power cable
to the mount while the device is
in the mount.
Connect the USB cable.
Connect an AC adapter (available
on some device models).
Getting Started


Advertisement

Table of Contents
loading

This manual is also suitable for:

Live 1695

Table of Contents