Attachments; To Empty The Solution Tank; Upholstery Nozzle; Floor Tools - Kenmore Sears 175.8690090 Hom? cleaning system Owner's Manual

OPERATION
TO EMPTY THE SOLUTION TANK
See Figure 11
When cleaning iscompleted, both the Recovery Tank and the
SolutionTank should be emptied prior to storage. Empty the
RecoveryTank as described earlier. There are three methods
of emptying the Solution Tank.
Method 1:
t. Disconnect Pump Cord from Recovery Tank.
2. Remove Recovery Tank from Solution Tank and pour
_oiution o,Jtof the Filler Opening.
Method 2:
1. Place Floor Nozzle in bath tub or container.
2. Depress Solution Release Trigger and spray until empty.
Method 3:
1. Remove Roor Nozzle and insert Wand into Solution Tank
through the Filler Opening.
2. Vacuum solution out.
3. All solution is now in Recovery Tank. Empty Recovery
Tank as described ear(ier,
i
METHOD 1
METHOD 2
METHOD 3
Fig. 11
ATTACHMENTS
UPHOLSTERY NOZZLE
See Figure 12
Cleanmore Carpet Cleaner Upholstery Nozzle is an attach-
ment for furniture upholstery cleaning. The upholstery nozzle
may also be used to clean auto upholstery or carpeting. In
addition,the nozzle may be used to clean carpeted stairs and '
other areas difficultto clean with the normal floor nozzle.
Fig. 12
FLOOR TOOLS
See Figure 13
The Bare Floor/Carpet Brush (1) may be used on floors
without carpet for DRY cleaning with paper dust bag
Installed.
The Squeegee Attachment (2) is useful for WET pickup.
CAUTION: DO NOT run the Pump Motor when using these
attachments. To prevent Pu_ Motor from operating, make
sure Pump Motor Switch is in (_F" position, or unplug the
short Power Cord from the Solution Tank to the Recovery
Tank.
Fig. 13
Page 8