Epson G6050W User Manual page 193

Power light Lamp
light
On Off
On Off
Red Off
On Flashing
orange
Red Off
Red or flashing Flashing
red red
Red Off
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Temp light Filter light Status and solution
Off Flashing Low air flow through the projector.
orange
• Make sure that the vents and air filter are
• Clean or replace the air filter.
• If the problem persists, unplug the
Off Orange No air filter. Check to see if the air filter is
securely installed.
Off Red Low air flow through the air filter.
• Make sure that the vents and air filter are
• Clean or replace the air filter.
• If the problem persists, unplug the
Off Off The lamp is past its replacement period and
needs to be replaced to avoid damage. Do
not continue using the projector.
Flashing red Off A fan or sensor has a problem. Turn the
projector off, unplug it, and contact Epson
for help.
Flashing red Off Internal projector error or air exhaust vent
error. Turn the projector off, unplug it, and
contact Epson for help.
Off Flashing The air flow sensor has a problem. Turn the
red projector off, unplug it, and contact Epson
for help.
193
not clogged with dust or obstructed by
nearby objects.
projector and contact Epson for help.
not clogged with dust or obstructed by
nearby objects.
projector and contact Epson for help.