Correcting Image Shape With Corner Wall - Epson G6050W User Manual

Correcting Image Shape with Corner Wall

You can use the projector's Corner Wall setting to adjust the shape of an image projected on a surface
with right angles, such as a rectangular pillar or the corner of a room (PowerLite Pro G6800/G6900WU).
1. Turn on the projector and display an image.
Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.
Note: The image may not be evenly focused throughout even after performing the steps below.
2. Press the Menu button.
3. Select the Settings menu and press Enter.
4. Select the Geometric Correction setting and press Enter.
5. Select the Corner Wall setting and press Enter.
Note: If you see a confirmation message to continue, press Enter again.
You see this screen:
105