Insert Loop; Usb Port; Midi; Factory Restore & Firmware Update - Fender Mustang Floor Advanced Owner's Manual

Phones Jack
Plug in your headphones, ear buds, or powered speakers
AUX IN PHONES UNBALANCED OUT
R
to enjoy the Mustang Floor's stereo features. This jack
may also be used as a stereo recording output. The
output voicing is automatically set to "PA SYSTEM" while the
PHONES jack is used, internally overriding the output voicing
setting in the utility menu. Use the LEVEL knob to adjust the
output level.
A headphones icon
PHONES jack is in use.

Insert Loop

Connect external effects devices to the
INPUT INSERT LOOP AUX IN
SEND RETURN
Mustang Floor using the SEND and RETURN
jacks. Connect SEND to the input on your
external effects device and connect RETURN
to the output on your effects device. The on/off state of the insert
loop is stored as part of each preset.
You can bypass the external effects that you have connected
through the INSERT LOOP by pressing the INSERT footswitch
button on the Mustang Floor when in FX SELECT mode.

USB Port

EXP-1/

MIDI

GROUND
MS-4
LIFT USB
Use the USB port to connect the Mustang™ Floor to your
OUT
computer and take your music to the next level:
• Use Fender® FUSE™ software to control the Mustang Floor
from your computer and access bonus features not available
from the Mustang Floor alone!
Please download the Fender FUSE owner's manual from
fender.com for system requirements.
• Record and edit Mustang Floor digital audio using your
favorite recording software.
EXP-1/ MIDI POWER
The Mustang Floor is MIDI (Musical Instrument
MS-4
OUT IN
Digital Interface) compatible. Use the utility
menus (see Utility Menus, page 7) to configure
MIDI channel settings and select Continuous
Controller numbers (CC#) for outgoing expression pedal events.
Incoming MIDI Program Changes 0-99 are used to select Mustang
Floor presets 0-99. Incoming MIDI Continuous Controllers are used
to adjust Mustang Floor parameters as listed in the MIDI Appendix
starting on page 10.
M U S T A N G
LEVEL XLR OUT
R
L
will appear on screen when the
PHONES UNBALANCED OUT
R L
POWER
IN
I
0
MIDI
I
0
F L O O R
™
Factory Restore &
EXP-1/
GROUND
L
MS-4
USB
LIFT
Firmware Update
Factory Restore
You can restore your Mustang Floor to the original factory settings
if desired. All user presets will be erased!
To restore the Mustang Floor to factory settings:
1. Turn the unit off.
2. Press and hold the EXIT button while turning the unit back
on. Continue holding the EXIT button until it is no longer
illuminated.
LEVEL XLR OUT
R L GROUND
!
The FACTORY RESTORE function will erase all user modified
presets. It will also remove any custom effect selections that
have been modified using Fender FUSE software.
Firmware Update
From time to time, Fender may make available firmware updates
for your Mustang Floor to improve operation or to add new
features. To update the firmware on your unit you will need to
connect it through the USB port to a computer with Fender FUSE
software and an internet connection.
Please see the Fender FUSE manual at
details.
fuse.
There are several great places you can go to learn more about your
Mustang Floor:
• www.fender.com/support
• Join a Fender Community forum where you can ask questions
and read threads. There's even a forum just for the Mustang:
www.fender.com/community/forums
• Log on to the Fender Knowledge Base to download and
read "Frequently Asked Questions" (FAQ):
community/forums/faq.php
MIDI POWER
OUT IN I
0
EXP-1/ MIDI
MS-4
USB
LIFT
OUT

FAQ

POWER
IN I
0
fuse.fender.com for
www.fender.com/
9