Sfx Satellite Rear Panel; Dsp Effects Chart; Line Cord - Fender SFX Satellite Reference And Owner's Manual

SFX SATELLITE REAR PANEL

DSP EFFECTS CHART

Below is a listing of all effects available on the SFX
Satellite. To choose among these various effects
simply rotate the dial to the desired effect.
Remember both the DSP Send and DSP Return
knobs must be above their minimum positions in
order for the effect to be heard. (To change from
slower to faster sweeps,
shorter to longer delays
or smaller to larger
reverbs, turn the DSP
effects selection knob
clockwise.)
Reverb- 1 - Medium Room / Short Delay
Delay 2 - Medium Room / Medium Delay
3 - Medium Room / Long Delay
4 - Medium Hall / Short Delay
5 - Medium Hall / Medium Delay
6 - Medium Hall / Long Delay
Reverbs
Room 1 - Small
2 - Large
Plate 1 - Small
2 - Large
Hall 1 - Small
2 - Medium
3 - Large
LINE CORD - Your SFX Satellite is equipped with a
grounding type supply cord to reduce the possibility
of shock hazard.
grounded AC receptacle. The line cord should be
connected to a suitable power source in accordance
with voltage and frequency as shown in the power
rating on the rear panel. DO NOT ALTER THE AC
PLUG.
Vibratone* 1 - Slow Deep Sweep
2 - Medium Slow Deep Sweep
3 - Medium Fast Shallow Sweep
4 - Fast Shallow Sweep
*Note: For maximum Vibratone effect, turn the DSP Send,
DSP Return and SFX knobs fully clockwise and turn the
Output Level knob counterclockwise.
these settings in order to obtain your optimum settings.
Chorus 1 - Slow Deep Sweep
2 - Medium Sweep
3 - Fast Shallow Sweep
Flange Medium Sweep
Delay 1 - Short Delay
2 - Short to Medium Delay
3 - Medium Delay
4 - Medium to Long Delay
5 - Long Delay
Slap Quick, Single Echo
Reverb- 1 - Medium Room / Slow Sweep
Chorus 2 - Medium Room / Medium Sweep
3 - Medium Hall / Slow Sweep
4 - Medium Hall / Medium Sweep
5 - Medium Room / Flange-Like
8
Be sure to connect it to a
Experiment with