No Wwvb Tower Icon; Usb Charge Port - La Crosse Technology S98642 Information

 HOUR: The hour will flash. Press and release the +/RCC or -/°C/°F button to select the
correct hour. Confirm with the SET button and move to the next item.
 MINUTES: The minutes will flash. Press and release the +/RCC or -/°C/°F button to select
the correct minutes. Confirm with the SET button and move to the next item.
 YEAR: The year will flash. Press and release the +/RCC or -/°C/°F button to select the
correct year. Confirm with the SET button and move to the next item.
 MONTH: The month will flash. Press and release the +/RCC or -/°C/°F button to select the
correct month. Confirm with the SET button and move to the next item.
 DATE: The date will flash. Press and release the +/RCC or -/°C/°F button to select the
correct date. Confirm with the SET button and exit the program menu
 Note: The Day of the Week will set automatically once the year, month and date are set.
FAHRENHEIT/CELSIUS: Press and release the -/°C/°F button once to switch from Celsius to
Fahrenheit temperature display.

No WWVB tower icon

 The Weather Station has not received a WWVB time signal in the past 24-hours.

Position the Weather Station for better reception.
 Be sure you have good
attached.
 Hold the +/RCC button to send the Weather Station on a signal search at night.
 Allow up to 5 nights to receive the time signal.
IMPORTANT:
When operating on a/c power, the backlight and USB charging port will turn off while the
Weather Station searches for the WWVB signal, to avoid interference. The backlight will return
after the 2-10 minute search (which occurs during the late night or early morning hours). Then
the USB charging port will resume working.

USB charge port

 The Weather Station has an integrated USB charging port (on back) that will charge devices
when the Weather Station is plugged into a power outlet.
Note: This is a power output (charging) port only. This port will not supply power to the
Weather Station.
 You cannot use a USB cord from the Weather Station to your computer and operate the
Weather Station.
 Note: There is not a USB cord included with the Weather Station.

Connect your existing USB charging cord for your external device
port on the back of the Weather Station to begin to charge. Charging times will vary.
 Note: Check to be sure that your device will charge with the USB cord it came with. Many
USB cords are for data transfer only, and cannot be used for charging.
 Output: 1A maximum current USB
Do NOT overload USB port
 Note: Charging times will vary based on battery depletion and the individual device.
 Note: Many devices may require more power to charge than provided by this Weather
Station.
La Crosse Technology, Ltd.
batteries in the Weather Station or that the a/c cord is properly
to the USB charging
Page 13