Garmin GPSMAP 17 Installation Instructions Manual page 3

I I
NSTALLATION NSTRUCTIONS
I
NTRODUCTION
The GPSMAP 2006C/2010C Multi-Function Display (MFD) and GPS 17 must be properly installed according to the following instructions for
the best possible performance. To complete the installation, you need the appropriate fasteners, tools, and mounts listed in each section. These
items are available at most marine dealers. Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.
When drilling or cutting, always check first to see what is on the opposite side of the surface. Mount the GPSMAP 2006C/2010C in a location
that provides a clear, glare-free view of the display and easy operation of the controls. If you experience difficulty installing the unit, contact
Garmin Product Support or seek the assistance of a professional installer.
Mounting Knob
Bail Mount
Mounting Holes
GPSMAP 2010C Shown
GPSMAP 2006C/2010C & GPS 17 3