Garmin GPS Kit Owner's Manual page 19

The destination name, distance to the destination and
time to reach your destination are displayed at the top of
the screen. The speed you are traveling is shown at the
bottom of the screen. Once you are getting close to your
destination, eTrex will give you the message "ARRIVING
DESTINATION".
Stop the Train–I Want to Get Off
Anytime you want to stop a GOTO:
1. Press the PAGE Button and switch to the POINTER
Page. Press ENTER.
2. Highlight 'STOP NAVIGATION' on the OPTIONS
Page and press ENTER.
Clearing a Cluttered Map Display
After you've used the eTrex for a few trips, the map
display will become a bit messy from keeping track of
your every move. You can clean up the screen by clearing
the track log (the lines left on the Map Page):
To clear the track log:
1. Press the PAGE Button and switch to the MENU
Page.
Press the UP or DOWN Button and highlight
2.
'TRACKS'.
Press ENTER. You are now on the TRACKS Page.
3.
Use the UP Button and highlight CLEAR. Press
ENTER.
Use the DOWN Button and highlight 'YES'.
4.
Press the PAGE Button to select any
ENTER.
page.
You've now gone through the basic operation of eTrex
and you're ready to get out there and have some fun! To
turn eTrex off, press and hold the POWER Button.
Getting
Started
You've Made
Highlight STOP
NAVIGATION and press
ENTER on the Options
Page to stop a GOTO.
Press
It!
r ' s
O w n e
a l
M a n u
17