Goto Options - Garmin GPS III A Owner's Manual

REFERENCE
GOTO / GOTO Options
By highlighting a waypoint
name on a list and pressing
GOTO, you won't have to
manually enter the name of
your destination waypoint.
A GOTO can also be initiated
from the map display by plac-
ing the panning arrow on the
desired target waypoint.
50
To designate a GOTO waypoint from a list of waypoints:
1. Highlight the desired waypoint on the list and press GOTO. A confirmation page shows
the selected destination waypoint.
2. Press ENTER to confirm the selected waypoint and begin navigating.
To GOTO an existing waypoint on the map display:
1. Use the rocker keypad to place the arrow on the desired target waypoint.
2. Press GOTO, followed by ENTER, to begin navigating.
To GOTO any position on the map display:
1. Use the rocker keypad to place the arrow on any position you wish to navigate to.
2. Press GOTO to create a waypoint, called 'MAP', at the arrow position. Each time you
perform this step it will overwrite any previously created 'MAP' waypoint.
3. Press ENTER to being navigating.

GOTO Options

GOTO Options are also provided to initiate a TracBack route or cancel the
current GOTO destination.
To display the GOTO Options, press MENU (immediately after pressing
GOTO).
The following options are available:
TracBack— allows you to retrace your path using the track log automatically
stored in the receiver' s memory. This eliminates the need to store waypoints
along the way. (See page 52 for more information about TracBack.)