Arcconf Saveconfig - Adaptec RAID Controller User Manual

Note:
1. This function is only supported in Windows and Linux.
2. Be sure to copy the *.UFI update files from the DVD and not from the
BIOS/Firmware update diskettes.
Syntax
ARCCONF ROMUPDATE <Controller#> <BaseName> [Newversion <build#> [Force]]
[noprompt]
Parameters
Controller#
The controller number
BaseName
The name of the ROM image basename or the fully qualified name if you have a set of controller ROM
images.
Note: All UFI files must be in the same directory prior to invoking ARCCONF. If you
are copying UFI files from floppy images, be sure to check all images.
Newversion <build#>
Specifies the version of the firmware build.
Force
An optional parameter used to force a down-level firmware update.
Noprompt
An optional parameter that suppresses the confirmation prompt.
Examples
ARCCONF ROMUPDATE 1 AC2200
ARCCONF ROMUPDATE 1 AC220001.UFI
ARCCONF ROMUPDATE 1 AS483C newversion 12345 force noprompt

arcconf saveconfig

Description
Note: This command is supported on Windows systems only.
Saves the controller configuration to a XML server template file, including the controller type, operational
settings, physical drive size, logical drive size, RAID level, and more. Use this file with the PLAYCONFIG
command to deploy the same controller configuration to other servers in your storage space; see
playconfig on page 31 for more information.
Note: Be sure to check the log file to verify that the configuration XML file was created
successfully. The exit codes, shown below, indicate the success or failure of the
operation.
Code
SUCCESS
FAILURE_GENERAL
Proprietary and Confidential to PMC-Sierra, Inc.
Document No.: CDP-00284-01-A Rev. A, Issue:
Adaptec RAID Controller Command Line Utility User's Guide
Value Meaning
0 Configuration XML generated successfully.
1 An error occurred and the configuration XML
could not be generated.
arcconf
33