Table of Contents
Advertisement
Adaptec RAID Controller Command Line Utility User's Guide
Syntax
ARCCONF GETVERSION (use this for information on all controllers)
ARCCONF GETVERSION <Controller#> (use this for information on a specific
controller)
Parameters
Controller#
Controller# is the controller number
Examples
ARCCONF GETVERSION
arcconf identify
Description
Identifies a physical or logical device by blinking its LEDs.
Syntax
ARCCONF IDENTIFY <Controller#> LOGICALDRIVE <LogicalDrive#>
ARCCONF IDENTIFY <Controller#> DEVICE <Channel#> <ID>
Parameters
Controller#
Controller number
Channel/ID
Number of the logical drive to be identified
Channel#
Channel number for the device to be identified
Device#
Device number for the device to be identified
Examples
ARCCONF IDENTIFY 1 DEVICE 0 0
ARCCONF IDENTIFY 1 ALL
arcconf imageupdate
Description
Allows new firmware to be flashed to the hard drive.
Syntax: Physical Device Usage
ARCCONF IMAGEUPDATE <Controller#> DEVICE <Channel# ID# ChunkSize# Filename>
[Mode#] [noprompt]
Proprietary and Confidential to PMC-Sierra, Inc.
27
Document No.: CDP-00284-01-A Rev. A, Issue:
Advertisement
Table of Contents
Need help?
Do you have a question about the Adaptec RAID Controller and is the answer not in the manual?
Questions and answers