Epson WF-2540 User Manual page 31

4. Enter your wireless password (or network name and then password).
• Press the arrow buttons to highlight a character or a function button displayed on the keypad.
Then press the OK button to select it.
• To change the case of letters, select AB12 (uppercase), ab12 (lowercase) and press the OK
button.
• To select a symbol, select Symbol and press the OK button. Then highlight a symbol and press
the OK button to select it.
• To enter a space, select Space and press the OK button.
• To delete characters, select the back arrow and press the OK button.
• When you finish entering characters, select Done and press the OK button.
5. Press the OK button to confirm Wi-Fi settings.
6. Select Yes if you want to print a network status report, or No if not, and press the OK button.
The WiFi light should now be on, but not flashing.
Note: If the WiFi light is off, you may have selected the wrong network name or entered the
password incorrectly. Repeat these steps to try again.
Related topics
Solving Network Problems
31