Advertisement
Supporting Various 3D Systems
NVIDIA™ 3D Vision™
You can build the 3D system by using the confi guration shown below. Enjoy vivid
3D worlds such as powerful high-defi nition games, digital photos, 3D Blu-ray
Discs, streaming movies and videos.
®
Microsoft
Compatible
Windows Vista
®
-/
NVIDIA™
Windows
®
7-
graphic card
based computer
[Viewing 3D images]
View 3D images at a distance at least three times further than the height of the screen. Each person views and feels the 3D images differently. In some cases, the effects may cause viewers to feel sick.
If you see double 3D images or do not see stereoscopic images, you may feel fatigue or discomfort If you feel sick, immediately stop viewing 3D images. Children under the age of six should not view 3D images.
The DLP
™
System Maintains Long-lasting, Stable Performance.
In the DLP
™
system, the image quality does not degrade with time due to long life of the device. You can use the projector for various systems over a long period without
4
worry of quality loss. *
High Brightness of 2,500 lm*
Speaker Meet Your Meeting/Seminar Room Needs.
High brightness of 2,500 lm*
5
ensures bright and easy-to-see image projection.
The volume level of the 10 W high-output speaker is enough for meeting
rooms and classrooms; you do not need to use an external speaker. You can
make multi-media presentations (including audio presentations).
Ensuring a 3,000-hour Lamp Replacement Cycle
and a 4,000-hour Air Filter Replacement Cycle
6
A 3,000-hour*
lamp replacement cycle and a 4,000-hour*
cycle reduce the hassle and the cost of maintenance for a long time, minimizing
environmental impact.
8
Quiet 28-dB*
Design Does Not Interrupt
Meetings or Classes
As the quiet design keeps noise levels down to 28-dB*
cooling fan is hardly noticeable. The audience can concentrate on the
presentation and the screen images even during quiet scenes.
Extensive Interfaces with an HDMI Input Terminal
Extensive interfaces, including two sets of computer (RGB) input terminals
(one set is switchable to output.) and an HDMI input terminal, allows a wide
range of system confi gurations.
0.45 W Standby Power Consumption*
When Standby mode is set to Eco, the standby power consumptions is as low
as 0.45 W *
9
, reducing running cost and effects on the environment.
NVIDIA™
PT-CW230/CX200
3D Vision™ kit
5
and a 10 W High-output
7
air fi lter replacement
8
, the sound of the
9
DLP™ Link™
As synchronized signals are contained in 3D images that you view, you can build
the 3D system without connecting the emitter.
Confi guration: 3D Contents + 3D Reproduction apparatus + 3D Glasses (DLP™ Link™ system)
IR system
3D SYNC OUT terminal (of PT-CW230/CX200) and the IR emitter are connected
to build the 3D system.
Confi guration: 3D Contents + 3D Reproduction apparatus + 3D Glasses (IR system) + IR Emitter
"Direct Power Off" Right after Use
The breaker in the room is directly turned off without operating the power
switch of the ceiling-mounted projector. You can leave the room immediately
after the meeting or the class.
Easy to Replace the Lamp and Air Filters
You can replace the lamp and the air
fi lters from the top of the projector.
There is no need to detach the
projector from the ceiling bracket.
Wireless Remote Control is Convenient
When Using More Than One Projector.
A maximum of two IDs can be set up, allowing individual remote
control of each projector.
Eco-friendly
•
No halogenated fl ame retardants are used in the cabinet.
•
Lead-free glass is used for the lens.
•
Low standby power of 0.45 W*
•
Switchable lamp mode
*1 Available for PT-CW230
*2 In this method, images for the right eye and the left eye are switched at a high speed.
*3 To view 3D images, active-shutter 3D glasses are separately required. (In the active shutter
system, the right/left liquid crystal shutter is opened and closed alternately according to
projected images.)
*4 Twenty-four-hour continuous operation is not available.
*5 PT-CX200 has brightness of 2,000 lm.
*6 This is the maximum value when the lamp power is set to Eco mode where the lamp is turned
on for 2 hours and off for 0.25 hours. If the lamp is turned on more times or kept on for a long
time, the lamp replacement cycle will shorten. In Normal mode, the lamp replacement cycle
is 2,000 hours.The usage environment affects the duration of the lamp.
*7 With the lamp power set to Eco. The usage environment affects the duration of the fi lter.
*8 When the lamp power is set to Eco and fan control is set to Off.(Non-high altitude setting)
*9 Standby mode: Eco. When the Standby mode is set to Eco, network functions such as
LAN Standby On do not work.
9
Advertisement
