Timer Operation - Daikin FTXN09KEVJU Operation Manual

EDUS041111_a

Timer Operation

The Timer Operation feature automatically turns off operation when you go to sleep and turns it back
on when you wake up.
Use the DAILY Timer mode on weekdays, and the ONE TIME timer mode on weekends.
 To select the ONE TIME timer
mode:
1
Press
timer mode.
 Each time the button is pressed,
the modes change as follows.
ONE TIME timer
DAILY timer
TIMER OFF
The timer lamp lights up.
 To cancel the timer settings:
1
Press
Precautions in setting the timer
 Before starting the timer operation, make sure
the current time is correct. If not, set the clock
correctly. (
 In making time settings,
make it easy to disable the timer too.
 If one minute has passed before making any
timer setting, the previous timer settings are
reintroduced and the timer is on standby.
In this case, use the
and make your desired timer settings.
Room Air Conditioners K-Series
to select the ONE TIME
to clear the timer settings.
The ONE TIME or
DAILY TIMER disappears
from the display, and the
timer lamp goes out too.
page 5)
is displayed to
(time setting) button
ON time
OFF time
1
2·4·6
Notes
 Even when the timer has been off, its
programmed settings are still in memory.
 If the system has the timer control ON but
you start and stop it manually using the
ON/OFF button before the designated ON
time, the system will restart again at the
programmed ON time.
Timer operation
 When the ON timer is programmed, the
system starts one hour (maximum) earlier
so that the temperature set by the remote
controller is reached just in time.
 When the ONE TIME timer is programmed,
the current time is no longer displayed.
Optional Accessories
3·5
(Timer settings displayed)
11
157