Table of Contents
Advertisement
Adjusting the Air Flow Direction
You can adjust the air flow direction to increase
your comfort.
Adjusting the
horizontal blade (flap)
SWING
Press
.
● Every time the button is pressed, "
appears or disappears.
.......
The flap automatically
swings up and down.
.......
To stop the flap at an
angle you like, press
Adjusting the
vertical blade (louvre)
Press
.
● Every time the button is pressed, "
appears or disappears.
.......
The flap automatically
swings up and down.
.......
To stop the flap at an
angle you like, press
Notes on flap angles
● When [SWING] is
selected, the flap
swinging range depends
on the operation mode.
(See the figure.)
● When [SWING] is
selected in heating
operation, the flap and
the diffuse swing up and
down in combination.
"
● The diffuser is kept open
in DRY or COOL mode.
3-D air flow
The 3-D air flow function controls the air flow by
alternating the horizontal swing (up and down)
and vertical swing (left and right).
This provides good air circulation throughout
SWING
.
the room and reduces temperature fluctuations.
Press
conditioner is operating.
■ ■ ■ ■ ■ To cancel 3-D air flow:
Press
"
NOTE
Unless [SWING] is selected, you should
set the flap at a downward angle in HEAT
mode and at a nearhorizontal angle in
COOL or DRY mode to obtain the best
performance.
ATTENTION
● Always use a remote controller to adjust
.
the flap angle. If you attempt to move it
forcibly with hand when it is swinging,
the mechanism may be broken.
DRY⋅COOL
SWING
and
during the air
The up/down and left/right
swing displays on the remote
controller will move.
SWING
or
.
HEAT
11
Hide quick links:
Advertisement
Table of Contents
